|
Model: Ritron RQX456XTUHF
|
Call Box - Ritron RQX Series UHF Heavy Duty Outpost Two-Way - Ritron RQX-456XT
Product
Specifications:
Internal Antenna
- Provides 1 mile line-of-sight range
Stainless steel
faceplate and tamper resistant fasteners
Field Programmable
and PC Programmable - Allows maximum system flexibility and easy set-up.
CTCSS and Digital
Coded Squelch - Allows compatibility with other radio systems.
Built-In Relay
for Remote Control Capability - Control gates, doors, and lights (momentary
or latching) with Ritron portables and base stations.
Programmable
Security Code - Allows selective remote control of gates, doors, and lights
with Ritron portables or base stations.
Programmable
DTMF ANI (Automatic Number Identification) - Allows unique transmit ID for
each OutPost callbox
MDC-1200 or
G-STAR ANI Protocols (factory installed option) - Allows compatibility with
customer’s "existing" ANI system requirements
Tone Alert w/
Switch Inputs - Allows optional switch to be connected to callbox (e.g. flex
switch). Distinct “tone alerts” indicate status of switch. OutPost
must bein “Always On” mode to transmit switch status
Battery Powered
- Alkaline or Ni-Cad with auto-cutover to either alkaline or Ni-Cad battery
if external power is interrupted
External-Power
Ready - Built-in external power filter and regulator
Low Battery
Alert Feature - OutPost transmits “alert tone” when PPT is pressed
and batteries are low
Solar Power
Ready - With optional Ritron Solar Power System below
"Always-On"
Feature - Allows OutPost to remain "on" and in "standby"
mode at all times
Specifications:
- Max. Freq. Separation:
20 MHz
- RF Channels:
1 Channel with Independent TX/RX frequencies.
- Synthesizer
Step Size: 12.5 kHz
- Frequency Stability:
+/-1.5 PPM (-30 to +60 C) TX/RX
- Tone/Code Signaling:
CTCSS (Quiet Call), Digital Coded Squelch (Digital Quiet Call),
- 2-Tone Paging
Decode, DTMF ANI Encode
- Dimensions:
Basic 7.0"H x 5.0"W x 3.0"D
- XT 11.5"H
x 9.5"W x 4.0"D
- Weight: 9 lb.
10 oz. with antenna and 6 D-cell batteries
- Enclosure Material:
O-Ring sealed valox, thermo-plastic. Reinforced fiberglass (XT)
- Environmental:
Splash resistant, shock and vibration per RITRON Test
- RJ11 Telephone
Jack: Internal RJ11 jack is used for PC programming.
- Antenna Fitting:
BNC
RECEIVER
- Wide Mode Narrow
Mode Wide Mode Narrow Mode
- Modulation Acceptance:
+/- 5.0 kHz +/- 3.75 kHz +/- 5.0 kHz +/- 3.75 kHz
- Sensitivity:
(12 dB SINAD) 0.20 µV 0.20 µV 0.22 µV 0.20 µV
- Noise Squelch
Sensitivity: Programmable per channel, factory set for 12 dB SINAD
- Frequency Response:
300 - 3000 Hz, de-emphasized
- Audio Output
1 Watt into 8 W, with less than 5 % THD @ the earphone jack
- Wide Mode Narrow
Mode Wide Mode Narrow Mode
- Emission Designator:
16K0F3E 11K0F3E 16K0F3E 11K0F3E
- Deviation: +/-
5.00 KHz +/- 2.50 KHz +/- 5.00 KHz +/- 2.50 KHz
- RF Power Output:
1.0 Watts maximum @ +13 VDC 2.0 Watts maximum @ +13 VDC
- Time-out Timer:
60 seconds, programmable
- Standby: 75
mA
- Sleep: 25 mA
- Avg.Standby
w/Power Saver: 30 mA
- Receive: 250
mA
- Transmit: 475
mA @ 2.0 Watts, 375 mA @ 1.0 Watts
- Power Supply:
Internal (6) "D" Cell Battery Holder and
- Internal screw
terminal connectors for external 12 VDC supply
|
Home | Products | Rebates | FAQ | FCC | Service / Why
Us? | My123
| About
